**New Product** 

Our TC Kline Racing Spherical Ball Joint Conversion kits for E9X/E82 completely eliminate all rubber in the front and rear suspension for exact control.  Designed for race cars in racing series where ball joint conversions are allowed.

E9X Rear Suspension Upper wishbone Arm;  Left  33 32 2 283 545,  Right  33 32 2 283 546 

Guide Rod Arm;  Left  33 32 2 283 547,  Right  33 32 2 283 548  

Upgrade to these M Arms on non-M cars when converting to ball joint.  NOTE: On Non-M cars, the rear toe link uses rubber bushings.  If you want to convert to Ball Joints, then the addition of (4) 25mm housings w/bearings and bushings will be required.

E9X M Front Suspension Tension Arms;  Left  31 10 2 283 575,  Right  31 10 2 283 576  These are slightly longer than non-M.

E9X M Rear Spring Arm;  Left  33 32 2 283 885,  Right  33 32 2 283 886  Requires longer bolts;  Lower Shock Mount  33 52 2 283 638 (2),  Outer  33 17 6 760 342 (2),  Inner  33 30 2 283 616 (2)  These are cast aluminum and use TC Kline Rear shocks: S/A 8241-1200Sport or D/A 8242-1009RSport.

This kit includes the following parts:

4   - E9XR002.25 - 25mm Bearing Housing for Rear Suspension Arms
4   - E9XR002.33 - 33mm Bearing Housing for Rear Arm Mono Ball Kit
12 - E9XR002XA  - Bushing for E9X Rear Mono Ball Kit
4   - E9XR002XB  - Conical Bushing Sleeve for E9X Mono Ball Kit
8   - HAB-10T      - Offset Mono Ball Bearing
8   - 98455A137  - Retaining Clip