Home | About | Contact | View Cart | Checkout   Cart: USD $0.00   

     (614) 771-7744
 

              

 Performance Suspension 101

    Click Here For Motorsports


Product Search

Categories

    All Categories
    82-91 (E30) 3 Series  
    92-99 (E36) 3 Series  
    99-05 (E46) 3 Series  
    06-13 (E9X) 3 Series  
    07-13 (E82) 1 Series  
    2015+ F8X M3, M4, F87 M2  
    96-02 (E36/4) Z3  
    02-08 (E85) Z4 
  
    01-11 (R53/R56) Mini  
      
    Motorsports  
      
    Performance Suspension 101  
    Shocks, Struts  
    Suspension Kits  
    Spring Kits  
    Suspension Components  
    TC Kline Components  
    Sway Bars/Strut Braces  
    Exhaust Systems  
    Performance Flywheels  
    Brakes  
      
    APR Tuning  
      
    TC Kline Merchandise  
    P3 Guages  
    ****CLEARANCE****
  
    Cars for Sale  

Other Links

    Home Page
  
    My Account
  
    Control Panel
  
    Site Map
  
    Price List
  
    Make Payment
  
    Like us on Facebook!
  
    TCKline Racing
  


Email List


Join Our Email List!

Name:
Email:

 
 
  

 

Qty:      

This H&R Wheel Spacer kit includes 2 wheel spacers and 10 Lug bolts to connect the spacer to the hub. The existing lug bolts are used to attach the wheel to the new spacer.  Please make sure your current lug bolts are not damaged prior to installing this spacer kit.

Bolt Pattern: 5/120

Center Bore: 72.6

Bolt or Stud: Lug Bolt

Thread Type: 14x1.25

Spacer Thickness: 30 mm

H&R Part #: 60757254

Installation Tips for this wheel spacer kit:
 

  1. Remove wheel bolts and wheel.
  2. Place TRAK+® Spacer on hub of car (where the wheel was attached) making sure that the spacer is fully seated and flush with the hub.
  3. Fasten DRA spacer to car using supplied special bolts. Carefully hand turn bolts making sure that they spin in easily so as to not cross-thread. Repeat with the remaining bolts.
  4. With hand wrench, snug up the bolts in a star.
  5. Tighten bolts in a star pattern using torque wrench set to manufacturers specification.
  6. Make sure no bolt heads protrude past spacer.
  7. Place wheel onto the spacer and carefully line up the wheel / spacer bolt holes and mounting hole.
  8. Carefully hand turn bolts making sure that they spin in easily so as to not cross-thread.
  9. Repeat step 8 with the remaining bolts.
  10. With hand wrench, snug up the bolts in a star pattern.
  11. Before fully tightening, spin the wheel and tire to check for any noise or interference.
  12. Tighten the wheel bolts in a star pattern with a torque wrench set to wheel manufacturers specifications.

 




 



You Are Visitor

300


© Copyright 2021 TC Kline Racing, Inc All Rights Reserved.
© Copyright 2021 PowerWebsites.com All Rights Reserved.
Shopping Cart Powered by PowerWebsites.com